WE-EF / 111-0228
RFL540-SE LED

Description:
IP66, Class I. IK07. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Non-reflecting safety glass lens, hinged. Silicone CCG® Controlled Compression Gasket. Luminaire is factory-sealed and does not need to be opened during installation. 

Integral electronic converter with DALI interface. Advanced thermal management protects LEDs while optimising lumens output. Removable LED boards for upgrading. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept.

Variant with 2200 K or as 'Wild-Light' 2200 K combined with 3000 K with Eco Step Dim® Advanced or Motion available on request, must be specified at time of ordering. 
Contact WE-EF direct or your local WE-EF sales representative for an individual solution designed to precisely meet your needs.

Including 0.5 m cable with a cable connector.

Maximum spacing for streetlighting applications depends on wattage and light distribution: 5.5 to 9 times the mounting height.

Wild-Light options available on request.

Specification text:
Street and area lighting luminaire, compact design with integrated heat sink. Spigot mounted for Ø 60 x 100 mm. Round housing Ø 570 x 82 mm. Windage: 0.255 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with 5CE superior corrosion protection, optional 5CE+Primer. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. PCS hardware. Non-reflecting safety glass lens, hinged with safety switch. Impact protection rating IK07. Silicone CCG® Controlled Compression Gasket. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I or Class II. Surge protection: 6/6 kV (optional SP10 10 kV). CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specifications: