WE-EF / 111-0357
RFL540-SE LED

Description:
IP66, Class I. Class II on request. IK07. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG® Controlled Compression Gasket. Non-reflecting safety glass lens, hinged with safety switch. Integral EC electronic converter in thermally separated compartment. DALI. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Factory installed LED circuit board. The luminaire is factory-sealed and does not need to be opened during installation. 

Variant with 2200 K or as 'Wild-Light' 2200 K combined with 3000 K with Eco Step Dim® Advanced or Motion available on request, must be specified at time of ordering. For further details and available variants see below under additional information – Wild-Light Presentation.

Contact WE-EF direct or your local WE-EF sales representative for an individual solution designed to precisely meet your needs.

Brackets to be ordered separately.

Specification text:
Street and area lighting luminaire, compact design with integrated heat sink. Spigot mounted for Ø 60 x 100 mm. Round housing Ø 570 x 82 mm. Windage: 0.255 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with 5CE superior corrosion protection, optional 5CE+Primer. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. PCS hardware. Non-reflecting safety glass lens, hinged with safety switch. Impact protection rating IK07. Silicone CCG® Controlled Compression Gasket. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I or Class II. Surge protection: 6/6 kV (optional SP10 10 kV). CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specification text (neutral):
Street and area lighting luminaire, compact design with integrated heat sink. Spigot mounted for Ø 60 x 100 mm. Round housing Ø 570 x 81 mm. Windage: 0.255 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. PProtection rating IP66. Powdercoated with superior corrosion protection, optional chlorine and seawater-resistant treatment available. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. Polymer coated stainless steel hardware. Non-reflecting safety glass lens, hinged with safety switch. Impact protection rating IK07. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I or Class II. Surge protection: 6/6 kV (optional 10 kV). CAD-optimised optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specifications: