WE-EF / 111-0407
RFL530-SE LED

Description:
IP66, Class I. IK07. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Non-reflecting safety glass lens, hinged. Silicone CCG® Controlled Compression Gasket. Luminaire is factory-sealed and does not need to be opened during installation. 

Integral electronic converter with DALI interface. Advanced thermal management protects LEDs while optimising lumens output. Removable LED boards for upgrading. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Optional 2200 K version up to max. 1050mA available. To be specified at time of ordering.

Including 0.5 m cable with a cable connector.

Maximum spacing for streetlighting applications depends on wattage and light distribution: 5.5 to 9 times the mounting height.

Specification text:
Street and area lighting luminaire, compact design with integrated heat sink. Spigot mounted for Ø 42 x 100 mm. Round housing Ø 460 x 81 mm. Windage: 0.166 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with 5CE superior corrosion protection, optional 5CE+Primer. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. PCS hardware. Non-reflecting safety glass lens, hinged with safety switch. Impact protection rating IK07. Silicone CCG®  Controlled Compression Gasket. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I or Class II. Surge protection: 6/6 kV. CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specifications: