WE-EF / 102-0387
AFL130-WL

Description:
Wild-Light. IP66, Class I or Class II. IK08. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. CCG® Controlled Compression Gasket. Non-reflecting flat safety glass cover, hinged. Integral EC electronic converter in thermally separated compartment. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Factory installed LED circuit board. Wild-Light with Advanced or Motion available on request, must be specified at time of ordering. For further details and available variants see below under additional information – Wild-Light Presentation. The luminaire is factory-sealed and does not need to be opened during installation. Can be used as post top or side entry version. Specification at time of order is recommended.

Spigot Ø 76 x 100 mm. Spigot Ø 60 x 100 mm or 42 x 100 mm optional available. Must be indicated during order placement.

Contact WE-EF direct or your local WE-EF sales representative for an individual solution designed to precisely meet your needs.

IMPORTANT
Photometric data legend (for ies-data):
Part ID (channel I+II - both colour temperatures 1850K (PC Amber) + 2200K / 2200K + 3000K)
Part ID_1 (channel I - lower colour temperature 1850K (PC Amber) / 2200K only)
Part ID_2 (channel II - upper colour temperature 2200K / 3000K only)

Photometric data legend (for ldt-data):
Part ID (channel I+II - both colour temperatures 1850K (PC Amber) + 2200K / 2200K + 3000K)
Part ID (channel I - lower colour temperature 1850K (PC Amber) / 2200K only)
Part ID (channel II - upper colour temperature 2200K / 3000K only)

Photometric files (IES, LDT) for light distributions [S61] [S65] [S66] [S70] [R60] [R61] [P66] [Q66] [A61] with Backlight Shield on request.

Specification text:
Wild Light by WE-EF is an integrated system of adaptive lighting technology, sensors and connectivity. At the heart of the concept are new LED modules for street and area lighting luminaires combining LEDs in more nature-friendly 2200 K with LEDs in warm white/3000 K LED or True Amber + 2200 K. Wild-Light versions are available with Motion (also available with Zhaga interface) or Advanced control systems. Wild-Light Motion activates the 3000 K channel only when passers-by or vehicles are within their range. At other times, the lighting is reduced to a low level of 2200 K to provide orientation from a distance – or else it is completely switched off. Wild-Light Advanced for two step dimming comes with fully automatic dimming preset, starting the night with warm white 3000 K, reduced to nature-friendly in the middle of the night 2200 K, and returning back to warm white in the early morning 3000 K. Both control systems result in maximum protection of the environment and additional energy savings. AFL130 LED Street and area lighting luminaire, compact design with superior thermal management. Spigot Ø 76 x 100 mm. Optional adapter for spigots 60 x 100 mm or 42 x 100 mm available. Spigot rotatable for either post top or side entry version. Must be ordered separately and indicated during order placement. Rectangular housing 653 x 300 x 65 mm. Windage: 0.1956 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with 5CE+Primer superior corrosion protection. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. PCS hardware. Non-reflective flat safety glass cover. Hinged cover and frame. Impact protection rating IK08. CCG® Controlled Compression Gasket. Compressed, seal with integrated air chamber. Integral LED driver. LED DALI D4i Driver controllable via Wild-Light Advanced or Wild-Light Motion as option. Class I or Class II. Surge protection: 6/6 kV (optional SP10 10 kV). CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. Wild-Light can be combined with all OLC® light distributions. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specifications: