WE-EF / 185-2689
ETC330-GB LED

Description:
IP67*, Class I. IK10+. Stainless steel construction including PCS hardware. Silicone rubber gasket. Safety glass lens; max. load 5 tonnes. Luminaire can be driven over at low speed. Factory-sealed termination chamber complete with cable gland and 1.5 m of flexible PVC free cable. Integral EC electronic converter in thermally separated compartment. 'No tool' removable gear/lens tray. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Factory installed LED circuit board. Gimbal mounted, 360° rotatable and 30° tiltable. Optional 2200 K version available. To be specified at time of ordering.

The optional installation blockout is recommended for mounting. To be ordered separately.

The luminaire is not suitable for permanent underwater operation and must be switched off in the event of flooding.

Optional with Anti-Slip ceramic Coating ASC to DIN 51130 (Trip Classification 10) available on request.

* Additionally tested to IP66, IP67, IP68 0.1 bar 3h, up to 1 m depth according to DIN EN 60598 and IP69K/80° according to DIN EN 60529.

Specification text:
Inground luminaire, reduced depth, round for flush installation. Luminaire housing made of stainless steel construction Ø 252 x 265 mm. Protection rating IP67. PCS hardware. Safety glass lens. Impact protection rating IK10+.Max. static load, 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket. Integral LED driver in thermally separated compartment. Class I. Surge protection: 1/2 kV (optional SP10 10 kV). Factory-sealed termination chamber complete with cable gland and 1.5 m of flexible PVC free cable. CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Gimbal mounted, 355° rotatable and 20° tilt. Luminaire requires installation blockout, to be ordered separately. Factory installed LED circuit board.

Specification text (neutral):
Inground luminaire, reduced depth, round for flush installation. Luminaire housing made of stainless steel construction Ø 252 x 265 mm. Protection rating IP67. Polymer coated stainless steel hardware. Safety glass lens. Impact protection rating IK10+. Max. static load, 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket. Integral LED driver in thermally separated compartment. Class I. Surge protection: 1/2 kV (optional 10 kV). Factory-sealed termination chamber complete with cable gland and 1.5 m of flexible PVC free cable. CAD-optimised optics for superior illumination and glare control. Gimbal mounted, 355° rotatable and 20° tilt. Luminaire requires installation blockout, to be ordered separately. Factory installed LED circuit board.

Specifications: