WE-EF / 108-1151
VFL530

Description:
Pole or wall-mounted LED luminaire with integrated heat sinks.  

IP66.  Class I or Class II.  IK08.  Marine-grade, die-cast aluminum alloy.  5CE superior corrosion protection including PCS hardware.  Silicone CCG® Controlled Compression Gasket.  RFC® Reflection Free Contour main lens.  CAD-optimized optics for superior illumination and glare control.  Integral driver in thermally separated compartment.  OLC® One LED Concept.  Factory-installed LED circuit board.  0-10V Dimming comes standard with luminaire.  Spigot Ø 3”x5” optional available, must be indicated during order placement.  Luminaire is factory-sealed and does not need to be opened during installation.  

Recommended mounting height 10-30 ft, depending on lamp type selected.  

Specify product with 7 Digit product code – Finish Color.  Accessories, such as mounting, optical, and electrical, must be specified separately.  
Example: XXX-XXXX-9004 (Black) 
+ XXX-XXXX (Accessory 1)

Specification text (neutral):
Street and area lighting luminaire, compact design with integrated heat sink. Spigot mounted for Ø 76mm, Ø 60 optional. Rectangular housing 470 x 330 x 50 mm. Windage: 0.04 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with superior corrosion protection, optional chlorine and seawater-resistant treatment available. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. Polymer coated stainless steel hardware. UV stabilised PMMA contoured main lens for reduction of internal reflection. Hinged cover and frame. Impact protection rating IK08. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I or Class II. Surge protection: 6/6 kV. CAD-optimised optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The interchangeable lenses are attached directly to the LED boards. The luminaire is factory-sealed and supplied ready for connection with an IP68 cable connector and does not need to be opened during installation. Factory installed LED circuit board.

Specifications: