WE-EF / 147-0701
FLA740 LED

Description:
IP66. IK08. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Safety glass lens, hinged. Silicone CCG® Controlled Compression Gasket. 

Integral electronic converter with DALI interface in thermally-shielded compartment. Advanced thermal management protects LEDs while optimising lumens output. Removable LED boards for upgrading. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Optional 2200 K version available. To be specified at time of ordering.

Protractor scale for accurate aiming from 0° to 15° above horizontal.

Including 0.5 m cable with a cable connector.

Specification text:
Street and area lighting luminaire. Rectangular housing 560 x 330 x 190 mm. Windage: 0.090 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with 5CE superior corrosion protection, optional 5CE+Primer. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. PCS hardware. Protractor scale for accurate aiming from 0° to 15° above horizontal. Safety glass lens, hinged. Impact protection rating IK08. Silicone CCG® Controlled Compression Gasket. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I. Surge protection: 6/6 kV (optional SP10 10 kV). CAD-optimised OLC® One LED Concept optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The interchangeable lenses are attached directly to the LED boards. The luminaire is factory-sealed and supplied ready for connection and does not need to be opened during installation. Factory installed LED circuit board.

Specification text (neutral):
Street and area lighting luminaire. Rectangular housing 560 x 330 x 190 mm. Windage: 0.090 m². Marine-grade, die-cast aluminium alloy. Protection rating IP66. Powdercoated with superior corrosion protection, optional chlorine and seawater-resistant treatment available. Standard colours RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016. Polymer coated stainless steel hardware. Protractor scale for accurate aiming from 0° to 15° above horizontal. Safety glass lens, hinged. Impact protection rating IK08. Compressed, glued silicone seal with integrated air chamber. Integral LED driver in thermally separated compartment. Class I. Surge protection: 6/6 kV (optional 10 kV). CAD-optimised optics for superior illumination and glare control. Each LED illuminates the same area (multi-layer principle). No light above the 90° horizontal. The luminaire is factory-sealed and supplied ready for connection and does not need to be opened during installation. The interchangeable lenses are attached directly to the LED boards. Factory installed LED circuit board.

Specifications: