WE-EF / 186-0257 ETV130 LED Description: IP67, Class I. IK08. Marine-grade all aluminium construction. Anodized aluminium extrusion. PCS hardware. Silicone rubber gasket. Safety glass lens. Luminaire can be driven over at low speed, without accelerating or turning, by vehicles with air-filled tyres, at a weight up to 5 tonnes per wheel. Max. static load, 3 tonnes (according to DIN EN 60598-2-13). Factory-sealed termination chamber complete with cable gland and 0.5 m of flexible cable. Linear PMMA LED lens. Factory installed LED circuit board. LED boards can be easily removed for upgrading. Luminaire is factory sealed and does not need to be opened during installation. Integral electronic converter with DALI interface in thermally-separated compartment. Optional 2200 K version available. To be specified at time of ordering. The optional installation blockout is recommended for mounting. To be ordered separately. IMPORTANT! Inground blockouts must be installed with effective drainage, watch here. Specification text: Linear Inground luminaire, flush installation. Luminaire housing made of marine-grade all aluminium construction Ø 927 x 48 mm. Protection rating IP67. PCS hardware. Safety glass lens. Impact protection rating IK08. Luminaire can be driven over at low speed, without accelerating or turning, by vehicles with air-filled tyres, at a weight up to 5 tonnes per wheel. Max. static load, 3 tonnes (according to DIN EN 60598-2-13). Silicone rubber gasket. Integral LED driver, DALI. Class I. Surge protection: 1/2 kV (optional SP10 10 kV). Factory-sealed termination chamber complete with cable gland and 0.5 m of flexible cable, including sealable junction box SJB. Linear PMMA LED lens. CAD-optimised optics for superior illumination and glare control. Luminaire requires installation blockout (for single or multiple luminaire configuration), to be ordered separately. Factory installed LED circuit board. Specifications: